VOIP Settings

VOIP - Australian Regional settings and other stuff!

Dial Tone: 400@-19,425@-19;10(*/0/1+2)
US Dial Tone: 350@-19,440@-19;10(*/0/1+2) use this if you want to differentiate connection status.
Busy Tone: 425@-10;10(.4/.4/1)
Reorder Tone: 425@-10;10(.2/.2/1)
Ring Back Tone: 400@-19,425@-19,450@-19;*(.4/.2/1+­ 2+3,.4/.2/1+2+3,0/2/0)
Ring 1 cadence 60(.4/.2,.4/2)
Ring 3 Cadence: 60(1.5/3.4,.4/.2,.4/2,.4/.2,.4/2,.­ 4/.2,.4/2,.4/.2,.4/2,.4/.2,.4/2,.4­ /.2,.4/2,.4/.2,.4/2,.4/.2,.4/2,.4/­ .2,.4/2,.4/.2,.4/2)
CWT: 30(.2/.2,.2/4.4)
Hook Flash Timer Min: .07
Hook Flash Timer Max: .13
PSTN Hook Flash Len: .1
Disconnect Tone: 425@-30,425@-30;1(.375/.375/1+2)
On-Hook Speed: 26ms (Australia)
Daylight Saving: start=3/-1/7/3;end=10/-1/7/2;save=-1
Time zone: +10 Phone
SPA9000 Dial Plan: (13[1-9]xxxS0|1300xxxxxxS0|1800xxxxxxS0|000S0|0011xxxxxx.|[2-9]xxxxxxxS0|0[2-9]xxxxxxxxS0|0990009xxxS0|xx.|#,xx.)
DocsBox Dial Plan: (0011xxxxxxxxxxx|(0011xxxxxxxxxx|61xxxxxxxxx|xxxxxxxx|xxxxxxxxxx|13xxxx|1800xxxxxxx|1300xxxxxx|5000|**xxx|**xxxx|*xx|5xx.)
SPA9000 SIP Call Routing Rule: (<:L1,2,3,4>xx.|<:L2>#xx.)
SPA9000 Line 1 Dial Plan: (xx.|#,xx.)
SPA9000 Line 2 Dial Plan: (<#:>xx.)
Audio Codec: G729A

TRIXBOX RANDOM NOTES

Webmin
trixbox and freepbx users may notice webmin is not in the current repository.
This may help...
cd usr
wget http://prdownloads.sourceforge.net/webadmin/webmin-1.430-1.noarch.rpm
rpm -Uvh webmin-1.430-1.noarch.rpm
webmin should now be installed!

---

Problems Viewing the repository?
If you want to use yum from the command line:
To see which packages are available for update: yum -v check-update | more
To see which packages are currently installed: yum -v list | more
To install all available updates (Not Recommneded IMHO): yum -v update
To install one Package: yum -v install (Package Name)
To update one Package: yum -v update (Package Name)
To remove a Package: yum -v erase (Package Name)

---

Security Settings Check
If you see the warning, "Default Asterisk Manger Password is being used", change it by just editing these two files:
/etc/asterisk/manager.conf
Change secret = amp111 to your new password.
/etc/amportal.conf
Change AMPMGRPASS=amp111 to your new password.
Run amportal stop
Run amportal start
The warning message will have disappeared.

---

Disk Troubles?
No rescue disk?
You should run fsck in single user mode. One easy way to do this without a live cdrom boot is to reboot with the -F option
shutdown -rF now
or
Boot using rescue disk
You can get a list of all partitions on the disk with fdisk -l /dev/sdd
then fsck -f /dev/sda2

---

Setup MySQL CallerID Lookup Source on FreePBX Create Database mysqladmin -uroot -ppassword create freepbxcidlookup Create Table mysql -uroot -ppassword -Dfreepbxcidlookup -vv -e 'CREATE TABLE `callerid` (`number` VARCHAR(20) NOT NULL ,`name` VARCHAR(50) NOT NULL ,PRIMARY KEY (`number` , `name`))' Setup CallerID Lookup Source (Query= SELECT name FROM callerid WHERE number LIKE '%[NUMBER]%' )

---

Provision new firmware on a SNOM handset...
http://provisioning.snom.com/update6to7/update_once.php